ADTRAN AOS Version R10.1.0 Command Reference Manual page 2959

Command Reference Guide
source-port <port>
Use the source-port command to specify a port source to use for probe traffic. Use the no form of this
command to return to the default setting.
Syntax Description
<port>
Default Values
By default, the port is set to 0 which means that the probe will dynamically select the port number.
Command History
Release 13.1
Usage Examples
The following example configures the source port on probe1 as 5000:
(config)#probe probe1 http-request
(config-probe-probe1)#source-port 5000
60000CRG0-35E
Specifies the port number. Valid range is 0 to 65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Command Set
2959