ADTRAN AOS Version R10.1.0 Command Reference Manual page 3457

Command Reference Guide
connect range fxo <range>
Use the connect range fxo command to specify the range of physical interfaces for this trunk group usage.
Use the no form of this command to return to the default setting.
Syntax Description
<range>
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Usage Examples
The following example specifies that this analog loop start (LS) trunk will use the contiguous port range
fxo 0/1 through fxo 0/4:
(config)#voice trunk t01 type analog supervision loop-start
(config-t01)#connect range fxo 0/1-4
60000CRG0-35E
Specifies a range of ports in the format <slot/begin port range-end port
range> (for example, 0/1-4).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Analog Trunk Command Set
3457