ADTRAN AOS Version R10.1.0 Command Reference Manual page 3357

Command Reference Guide SIP HMR Command Set
Usage Examples
The following example sets a private variable called UNITID that holds the value of the unit ID parameter
from the target-unit header of the SIP message:
(config-rule-set-SET1)#message-rule RULE1 message-type any 5
(config-msg-rule-RULE1)#set private-variable UNITID header target-unit position first match-value
/.*unitID=(.*)/ new-value /\1/
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3357