ADTRAN AOS Version R10.1.0 Command Reference Manual page 2915

Command Reference Guide BGP Address Family Command Set
(config-bgp-vrf-ipv4)#
For more information about VRF and Multi-VRF BGP configuration, refer to the configuration guides
Configuring IPv4 Multi-VRF in AOS (article number 2156) and Configuring BGP in AOS for Releases
18.03.00/R10.1.0 or Later (article number 3524) available online at https://supportforums.adtran.com.
Redistributing static routes allows other network devices to learn about routes without requiring manual
input to each device on the network.
Usage Examples
The following example passes the static routes found in the route table to other networks running the BGP
routing protocol from the IPv4 BGP AF on the default VRF instance:
(config)#router bgp 100
(config-bgp)#address-family ipv4
(config-bgp-ipv4)#redistribute static
The following example passes the static routes found in the route table to other networks running the BGP
routing protocol from the IPv4 BGP AF on the nondefault VRF instance named RED1:
config)#vrf RED1 route-distinguisher ip 192.17.250.24:33
(config)#router bgp 100
(config-bgp)#vrf RED1
(config-bgp-vrf)#address-family ipv4
(config-bgp-vrf-ipv4)#redistribute static
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2915