ADTRAN AOS Version R10.1.0 Command Reference Manual page 2973

Command Reference Guide
port <value>
Use the port command to specify the User Datagram Protocol (UDP) port to listen for and respond to UDP
echo packets. Use the no form of this command to return to the default setting.
Syntax Description
<value>
Default Values
By default, the UDP port value is 6.
Command History
Release 17.2
Usage Examples
The following example specifies port 5055 as the UDP port for the UDP echo responder:
(config)#probe responder udp-echo
(config-responder-udp)#port 5055
60000CRG0-35E
Specifies the port number. Valid range is 1 to 65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Responder Command Set
2973