ADTRAN AOS Version R10.1.0 Command Reference Manual page 3559

Command Reference Guide
match ani <template> add diversion <template>
Use the match ani add diversion command to add Session Initiation Protocol (SIP) Diversion headers to
outgoing SIP messages. Use the no form of this command to remove the Diversion header from the SIP
message. Variations of this command include:
match ani <template> add diversion <template>
match ani <template> add diversion <template> <diversion type> <screening type> <privacy setting>
Syntax Description
ani <template>
add
diversion <template>
<diversion type>
60000CRG0-35E
Specifies the source automatic number identification (ANI) information to be
matched. This information is entered using wildcards and numerical digits.
Refer to the Functional Notes of this command for available wildcards and
proper data entry.
Specifies that when the match source matches the match source template,
SIP Diversion headers are added to the SIP trunk messages.
Specifies the match target and match target template used to execute the
command action when adding SIP Diversion headers to SIP messages.
This information is entered using wildcards and numerical digits. Refer to
the Functional Notes of this command for available wildcards and proper
data entry.
Optional. Specifies the reason for the diversion. If you specify the diversion
type, you must also specify whether or not the diversion is screened by the
network, and whether diversion privacy is used. Diversion reasons include
the following:
away Diverts the message if the receiving SIP agent is away.
deflection Diverts the message if the receiving SIP agent is
deflecting calls.
do-not-disturb Diverts the message if the receiving SIP agent has
do-not-disturb enabled.
follow-me Diverts the message if the receiving SIP agent has
FindMe-FollowMe enabled.
no-answer Diverts the message if the receiving SIP agent does not
answer.
out-of-service Diverts the message if the receiving SIP agent is
out-of-service.
time-of-day Diverts the message if the message is sent at a particular
time of day.
unavailable Diverts the message if the receiving SIP agent is
unavailable.
unconditional Diverts the message on an unconditional basis.
unknown Diverts the message if an unknown error occurs.
user-busy Diverts the message if the receiving SIP agent is busy.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
3559