ADTRAN AOS Version R10.1.0 Command Reference Manual page 3683

Command Reference Guide
caller-id
Use the caller-id command to specify a name or number to display as the caller ID information. Use the no
form of this command to return to the default value. Variations of this command include:
caller-id name <name>
caller-id number <number>
Syntax Description
name <name>
number <number>
Default Values
By default, the caller ID will display the extension number used when creating the loopback account. If no
name or alternate number is specified, the loopback extension number will be displayed.
Command History
Release A1
Usage Examples
The following example sets the caller ID information for the loopback account:
(config)#voice loopback 5555
(config-LB-5555)#caller-id name VQMTesting
(config-LB-5555)#caller-id number 372-5555
60000CRG0-35E
Specifies the name of the loopback account.
Specifies the number of the loopback account.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Loopback Account Command Set
3683