Table of Contents
Advertisement
Command Reference Guide
Network Monitor Probe Command Set
Command History
Release 17.2
Command was introduced.
Usage Examples
The following example configures the probe to fail if it loses 100 packets and change to pass if packet loss
is below 75:
(config)#probe probe1 icmp-echo
(config-probe-probe1)#threshold packet-loss in max 100 75
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2961
Advertisement
Table of Contents
Need help?
Do you have a question about the AOS Version R10.1.0 and is the answer not in the manual?
Questions and answers