ADTRAN AOS Version R10.1.0 Command Reference Manual page 3659

Command Reference Guide
alc
Use the alc command to enable auto level control (ALC). ALC reduces Realtime Transport Protocol (RTP)
received signals that are out of specification to the predefined levels. It is not necessary to enable ALC on
those networks that guarantee signal levels to be within specification. Use the no form of this command to
disable this feature.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 14.1
Release 15.1
Usage Examples
The following example activates the ALC for line sales:
(config)#voice line sales
(config-sales)#alc
60000CRG0-35E
Command was introduced.
Command was added to the Voice Line Interface.
Copyright © 2012 ADTRAN, Inc.
Voice Line Account Command Set
3659