ADTRAN AOS Version R10.1.0 Command Reference Manual page 3184

Command Reference Guide
<message type>
<message code>
Default Values
By default, all AOS IPv6 security features are disabled, and there are no configured IPv6 ACLs.
Command History
Release 18.1
60000CRG0-35E
reassembly-timeout
redirect
renum-command
renum-result
renum-seq-number
router-advertisement
router-renumbering
router-solicitation
time-exceeded
unreachable
Optional. Specifies the ICMP message type for matching ICMPv6 packets.
When you specify an ICMP message type, you must also specify an ICMP
message code. Message types range from 0 to 127 for error messages and
from 128 to 255 for informational messages.
Optional. Specifies the ICMP message code for matching ICMPv6 packets. You
must specify the message code when you specify the ICMP message type.
Message code range is 0 to 255.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
IPv6 Access Control List Command Set
Indicates that the fragment reassembly
time limit has been exceeded.
Indicates a redirect message.
Indicates a router renumbering
command.
Indicates a router renumbering result.
Indicates a router sequence number
reset.
Indicates a router advertisement
message.
Indicates a router renumbering for all
codes.
Indicates an router solicitation message.
Indicates the time limit has been
exceeded.
Indicates the destination is unreachable.
3184