ADTRAN AOS Version R10.1.0 Command Reference Manual page 2776

Command Reference Guide
ipv6 nd ra lifetime <value>
Use the ipv6 nd ra lifetime command to specify the router lifetime advertised in Internet Protocol version
6 (IPv6) router advertisement (RA) messages. This command is effectual when the interface is in router
mode. Use the no form of this command to return to the default setting.
Syntax Description
<value>
Default Values
By default, the router lifetime is set to 1800 seconds.
Command History
Release 18.1
Functional Notes
A value other than 0 for a router lifetime should be larger than the router advertisement interval specified in
the command ipv6 nd ra interval on page
Usage Examples
In the following example, the router lifetime advertised in RA messages is 3000 seconds:
(config)#interface vlan 1
(config-vlan 1)#ipv6 nd ra lifetime 3000
60000CRG0-35E
Specifies the router lifetime in seconds. Range is 0 to 9000 seconds. A
value of 0 indicates this is not a default router. A value other than 0
indicates to other nodes that this router can be used as a default router.
Command was introduced.
2775.
Copyright © 2012 ADTRAN, Inc.
VLAN Interface Command Set
2776