Command Reference Guide
Voice T1 Trunk Command Set
caller-id
Use the caller-id number command to interpret and pass caller identification (ID) on this trunk. This
information usually displays the name, number, time, and date of the calling party. Use the no form of this
command to cancel the setting.
Syntax Description
No subcommands.
Default Values
By default, caller ID is disabled.
Command History
Release 10.1
Command was introduced.
Usage Examples
The following example enables caller ID:
(config)#voice trunk t01 type t1-rbs supervision fgd role user
(config-t01)#caller-id
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3611