ADTRAN AOS Version R10.1.0 Command Reference Manual page 3075

Command Reference Guide
import
Use the import command to instruct the Dynamic Host Control Protocol version 6 (DHCPv6) server to
import the values of certain information from the global information pool when serving a DHCPv6 client
request. These parameters are served to DHCPv6 clients using this server pool as if their values had been
configured locally in the pool. Use the no form of this command to disable the importation of the specified
information. If no parameters are specified when the no version of this command is issued, then all
imported parameters are removed from the pool's configuration. Variations of this command include:
import dns-server
import domain-name
import ntp
import timezone
Syntax Description
dns-server
domain-name
ntp
timezone
Default Values
By default, no information is imported into the DHCPv6 server pool.
Command History
Release 18.3
Functional Notes
The parameters imported from the global information pool are served to DHCPv6 clients using this server
pool as if their values had been configured locally in the pool. If the imported values do not exist in the
global information pool, the respective value in the importing pool behaves as if it is not configured. Once a
value exists in the global configuration, the respective value in the importing pool is initialized and can be
used. These options can also be configured locally using the commands
domain-name <name> on page
<name> on page 3079, and
This command can be issued multiple times to import a separate parameter each time. If no parameters
are specified when the no version of the command is issued, then all imported parameters are removed
from the DHCPv6 pool's configuration.
Usage Examples
The following examples enables the importation of DNS server information to the DHCPv6 server pool:
(config)#ipv6 dhcp pool MyPool
(config-dhcpv6)#import dns-server
60000CRG0-35E
Specifies that domain naming system (DNS) server options are imported.
Specifies that domain name options are imported.
Specifies that Network Time Protocol (NTP) options are imported.
Specifies that time zone database information is imported.
Command was introduced.
3073, ntp address <ipv6 address> on page
timezone on page 3084.
Copyright © 2012 ADTRAN, Inc.
DHCPv6 Pool Command Set
client-identifier on page
3078, ntp domain-name
3071,
3075