ADTRAN AOS Version R10.1.0 Command Reference Manual page 2998

Command Reference Guide
auto-cost reference-bandwidth <value>
Use the auto-cost reference-bandwidth command to assign a different interface cost to an interface. It
may be necessary to assign a higher number to high-bandwidth links
path first (OSPF) metric calculations. Use the no form of this command to return to the default setting.
Syntax Description
<value>
Default Values
By default, the rate is set to 100.
Command History
Release 3.1
Usage Examples
The following example sets the auto cost reference bandwidth to 1000 Mbps:
(config)#router ospf
(config-ospf)#auto-cost reference-bandwidth 1000
60000CRG0-35E
Sets the default reference bandwidth rate in Mbps. Range is 1 to
4294967 Mbps.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Router (OSPF) Command Set
This value is used in open shortest
.
2998