ADTRAN AOS Version R10.1.0 Command Reference Manual page 3624

Command Reference Guide
match dnis <template> substitute <template>
Use the match dnis substitute command to configure dialed number identification service (DNIS)
substitution for outbound voice trunks. Use the no form of this command to remove the substitution.
Variations of this command include:
match dnis <template> substitute <template>
match dnis <template> substitute <template> name <name>
Syntax Description
dnis <template>
substitute <template>
name <name>
Default Values
By default, no DNIS substitution is configured.
Command History
Release A2
Functional Notes
The convention for DNIS templates is very similar to dial plan entries. Wildcards available for this
command are:
0-9 = Match exact digit only.
M = Any digit 1 to 8.
X = Any single digit (0 to 9).
N = Any digit 2 to 9.
[123] = Any digit contained in the bracketed list.
Do not use dashes, commas, spaces, etc., inside the brackets. Commas are implied between
numbers in the brackets.
60000CRG0-35E
Specifies the DNIS information to be substituted. This information is entered
using wildcards and numerical digits.Refer to the Functional Notes of this
command for available wildcards and proper data entry.
Specifies the DNIS information that is substituted for the original DNIS
information. This information is entered using wildcards and numerical
digits. Refer to the Functional Notes of this command for available wildcards
and proper data entry.
Optional. Specifies the name associated with the DNIS information. This
option is only available on trunks that support DNIS name information
(integrated services digital network (ISDN) trunks, Session Initiation
Protocol (SIP) trunks, T1 loop start (LS) network trunks, and T1 ground start
(GS) network trunks).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice T1 Trunk Command Set
3624