ADTRAN AOS Version R10.1.0 Command Reference Manual page 3277

Command Reference Guide Quality of Service Map Command Set
To configure this QoS policy, enter the following QoS map and interface commands:
1. Allocate low latency queuing (LLQ) priority voice traffic.
(config)#qos map MYMAP 10
(config-qos-map)#match ip list VOICE
(config-qos-map)#priority 256
2. Allocate the class-based weighted fair queuing (CBWFQ) data traffic bandwidth for Classes 1 and 2.
(config)#qos map MYMAP 20
(config-qos-map)#match ip list CLASS_1
(config-qos-map)#bandwidth 96
(config)#qos map MYMAP 30
(config-qos-map)#match ip list CLASS_2
(config-qos-map)#bandwidth 52
3. Specify the reserved bandwidth on the appropriate interface and apply the map.
(config-fr 1)#max-reserved-bandwidth 85
(config-fr 1)#qos-policy out MYMAP
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3277