ADTRAN AOS Version R10.1.0 Command Reference Manual page 3536

Command Reference Guide
alert-info
Use the alert-info command to allow the alert information attribute on incoming and/or outgoing auto
answer alert information. Use the no form of this command to cancel the setting. Variations of this
command include:
alert-info incoming auto-answer
alert-info outgoing auto-answer
Syntax Description
incoming auto-answer
outgoing auto-answer
Default Values
By default, both incoming and outgoing auto answer alert information is allowed on the NetVanta 7000
Series in the ALERT-INFO messages. However, both are disabled by default in the IP business gateways
(IPBGs) (Total Access 900 Series and NetVanta 1335). The IPBGs will ignore incoming auto answer in the
ALERT-INFO messages, and will not send the information on outgoing trunks.
Command History
Release 16.1
Usage Examples
The following example blocks outgoing alert-info auto-answer attribute on trunk T01:
(config)#voice trunk t01 type sip
(config-t01)#alert-info outgoing auto-answer
60000CRG0-35E
Specifies processing incoming ALERT-INFO attribute.
Specifies allowing the outgoing ALERT-INFO auto-answer attribute.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
3536