ADTRAN AOS Version R10.1.0 Command Reference Manual page 3378

Command Reference Guide
connect pri
Use the connect pri command to associate a specific interface with the integrated services digital network
(ISDN) group. Use the no form of this command to disconnect the specified interface from the ISDN
group.
Syntax Description
pri
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Usage Examples
The following example associates the pri 1 interface with ISDN group 1:
(config)#isdn-group 1
(config-isdn-group 1)#connect pri 1
60000CRG0-35E
Connects a primary rate interface (PRI) interface to the ISDN group. Type
connect ? for a list of valid interfaces.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice ISDN Group Command Set
3378