ADTRAN AOS Version R10.1.0 Command Reference Manual page 3267

Command Reference Guide
max-memory-usage <value>
Use the max-memory-usage command to specify the maximum memory the packet-capture is allowed to
use. This command specifies a memory usage threshold for the capture. Use the no form of this command
to return the threshold to the default value.
Syntax Description
<value>
Default Values
By default, the maximum memory usage threshold is set to 5M.
Command History
Release R10.1.0
Functional Notes
When this threshold is reached, the packet-capture enters memory usage critical (MUC) mode. When in
MUC mode, the capture stops capturing packets, continues any ongoing exports, and closes any open
captures to begin exporting them. The packet-capture remains in MUC mode until memory usage
decreases to 75 percent of the maximum memory usage.
Usage Examples
The following example specifies the maximum memory usage threshold for the packet-capture is 10M:
(config)#packet-capture 1CAPTURE standard
(config-packet-capture-1CAPTURE)#max-memory usage 10M
60000CRG0-35E
Specifies the memory usage threshold in bytes, kilobytes (k or K), or
megabytes (m or M). Valid range is 0 to 4294967295 bytes, 0 to 4194303
kilobytes, or 0 to 4095 megabytes.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Packet Capture Command Set
3267