ADTRAN AOS Version R10.1.0 Command Reference Manual page 3317

Command Reference Guide
match tag <number>
Use the match tag command to configure the route map to filter traffic based on a route's tag value. Use
the no form of this command to discontinue matching.
match tag <number>
match tag <number> <number>
Syntax Description
<number>
Default Values
No default values are necessary for this command.
Command History
Release 15.1
Functional Notes
More than one value may be specified as a tag to be matched.
Usage Examples
The following example instructs the route map named MYMAP to match a route tag of 100 or 200:
(config)#route-map MYMAP permit 100
(config-route-map)#match tag 100 200
Technical Review
The command ip route on page 1070
parameter to set the route tag value for local static routes.
Virtual private network (VPN) reverse-route injection (RRI) routes can also have a tag applied.
60000CRG0-35E
Specifies the desired route tag value to match. If more than one value is
specified, the match command will pass if any value matches. Valid range is
1 to 65535.
Command was introduced.
is related to the match tag command in that it includes an optional
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
3317