ADTRAN AOS Version R10.1.0 Command Reference Manual page 3418

Command Reference Guide
match ani <template> substitute <template>
Use the match ani substitute command to configure automatic number identification (ANI) substitution
for outbound voice trunks. Use the no form of this command to remove the substitution. Variations of this
command include:
match ani <template> substitute <template>
match ani <template> substitute <template> name <name>
Syntax Description
ani <template>
substitute <template>
name <name>
Default Values
By default, no ANI substitution is configured.
Command History
Release A2
Functional Notes
The convention for ANI templates is very similar to dial plan entries. Wildcards available for this command
are:
0-9 = Match exact digit only.
M = Any digit 1 to 8.
X = Any single digit (0 to 9).
N = Any digit 2 to 9.
[123] = Any digit contained in the bracketed list.
Do not use dashes, commas, spaces, etc., inside the brackets. Commas are implied between
numbers in the brackets.
60000CRG0-35E
Specifies the ANI information to be substituted. This information is entered
using wildcards and numerical digits. Refer to the Functional Notes of this
command for available wildcards and proper data entry.
Specifies the ANI information that is substituted for the original ANI
information. This information is entered using wildcards and numerical
digits. Refer to the Functional Notes of this command for available wildcards
and proper data entry.
Optional. Specifies the name associated with the ANI information. This
option is only available on trunks that support ANI name information
(integrated services digital network (ISDN) trunks, Session Initiation
Protocol (SIP) trunks, T1 loop start (LS) network trunks, and T1 ground start
(GS) network trunks).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Ring Group Command Set
3418