ADTRAN AOS Version R10.1.0 Command Reference Manual page 2968

Command Reference Guide
access-class <name> in
Use the access-class in command to specify an access control list (ACL) to filter access to the responder.
Use the no form of this command to remove the ACL from the responder.
Syntax Description
<name>
Default Values
By default, no ACL is configured.
Command History
Release 17.2
Usage Examples
The following example sets an ACL for the Two-Way Active Measurement Protocol (TWAMP) responder:
(config)#probe responder twamp
(config-responder-twamp)#access-class Anet in
60000CRG0-35E
Specifies a name of the ACL.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Responder Command Set
2968