ADTRAN AOS Version R10.1.0 Command Reference Manual page 3591

Command Reference Guide
registrar secondary <value>
Use the registrar secondary command to define the secondary Session Initiation Protocol (SIP) registrar
fully qualified domain name (FQDN) or IP address that is based on the domain naming system (DNS)
suffix. Use the no form of this command to return to the default setting. Variations of this command
include:
registrar secondary <value>
registrar secondary <value> tcp
registrar secondary <value> tcp <number>
registrar secondary <value> udp
registrar secondary <value> udp <number>
Syntax Description
<value>
<number>
tcp
udp
Default Values
By default, the IP address is set to 0.0.0.0 and the UDP port is set to 5060.
Command History
Release 15.1
Functional Notes
This command specifies which trunk will send SIP register messages. The configured value must resolve
to a valid IP address.
Usage Examples
The following example sets the registrar server to as1.adtran.com with a UDP port of 9060:
(config)#voice trunk t01 type sip
(config-t01)#registrar secondary as1.adtran.com udp 9060
60000CRG0-35E
Specifies the FQDN or IP address of the registrar server. IP addresses
should be expressed in dotted decimal notation (for example, 10.10.10.1).
Optional. Specifies the port number. Range is 0 to 65535.
Optional. Sets the Transmission Control Protocol (TCP) port of the
outbound proxy server.
Optional. Sets the User Datagram Protocol (UDP) port of the outbound
proxy server.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
3591