ADTRAN AOS Version R10.1.0 Command Reference Manual page 3303

Command Reference Guide
match as-path <name>
Use the match as-path command to configure the route map to route traffic based on the autonomous
system (AS) path list name. Use the no form of this command to discontinue matching.
Syntax Description
<name>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Usage Examples
The following example instructs the route map named MYMAP to match the AS path list named
TESTPATH:
(config)#route-map MYMAP permit 100
(config-route-map)#match as-path TESTPATH
60000CRG0-35E
Specifies the name of the AS path list you want to match.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
3303