Top Traffic Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
T T C
OP RAFFIC
To activate the Top Traffic Configuration mode, enter the ip flow top-talkers command at the Global
Configuration mode prompt. For example:
>enable
#configure terminal
(config)#ip flow top-talkers
(config-top-talkers)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect on page 67
do on page 71
exit on page 73
interface on page 74
All other commands for this command set are described in this section in alphabetical order.
interval on page 3365
ipv6 policy-class <ipv6 acp name> max-sessions <number> on page 3366
match list <name> on page 3367
monitor port <number> <description> on page 3368
sort-by on page 3369
top <number> on page 3370
60000CRG0-35E
S
OMMAND ET
Copyright © 2012 ADTRAN, Inc.

Top Traffic Command Set

3364