ADTRAN AOS Version R10.1.0 Command Reference Manual page 2835

Command Reference Guide Radio Interface Command Set
vap-isolation
Use the vap-isolation command to enable virtual access point (VAP) isolation, which prevents clients
from one VAP on a radio from directly accessing clients in another VAP on the same radio. Use the no
form of this command to return to the default value.
Syntax Description
No subcommands.
Default Values
By default, VAP isolation is disabled.
Command History
Release 15.1 Command was introduced.
Usage Examples
The following example enables VAP isolation an 802.11bg wireless radio:
(config)#interface dot11ap 1/1 radio-type 802.11bg
(config-dot11ap 1/1-bg)#vap-isolation
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2835