ADTRAN AOS Version R10.1.0 Command Reference Manual page 3354

Command Reference Guide
rule-set
Use the rule-set command to apply a rule set to a Session Initiation Protocol (SIP) header manipulation
rule (HMR) policy. This command is executed from the HMR Policy Configuration mode. Use the no
form of this command to remove the rule set from the policy. Variations of this command include:
rule-set <name>
rule-set <name> <sequence number>
Syntax Description
<name>
<sequence number>
Default Values
By default, no HMR rule sets are configured or applied to HMR policies.
Command History
Release R10.1.0
Usage Examples
The following example adds the previously created rule set SET1 to the HMR policy POLICY1:
(config)#hmr policy POLICY1
(config-policy-POLICY1)#rule-set SET1
60000CRG0-35E
Specifies the previously created rule set that you want to apply to the HMR
policy. Multiple rule sets can be added to a single policy. When multiple rule
sets are applied to a policy, the results of each rule set are applied before
the next rule set is evaluated and applied.
Optional. Specifies the sequence number given to the rule set, which
determines the order in which the rule sets are processed. Valid sequence
number range is 1 to 99999. By default, sequence numbering occurs in
increments of 10, and all rules are processed in sequence.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
SIP HMR Command Set
3354