ADTRAN AOS Version R10.1.0 Command Reference Manual page 3622

Command Reference Guide
match dnis <template> replace ani <number>
Use the match dnis replace ani command to replace dialed number identification service (DNIS)
information with automatic number identification (ANI) information on outbound voice trunks. Use the no
form of this command to remove the replacement. Variations of this command include:
match dnis <template> replace ani <number>
match dnis <template> replace ani <number> name <name>
Syntax Description
dnis <template>
replace ani <number>
name <name>
Default Values
By default, no DNIS replacement is configured.
Command History
Release A2
Functional Notes
The convention for DNIS templates is very similar to dial plan entries. Wildcards available for this
command are:
0-9 = Match exact digit only.
M = Any digit 1 to 8.
X = Any single digit (0 to 9).
N = Any digit 2 to 9.
[123] = Any digit contained in the bracketed list.
Do not use dashes, commas, spaces, etc., inside the brackets. Commas are implied between
numbers in the brackets.
60000CRG0-35E
Specifies the DNIS information to be replaced. This information is entered
using wildcards and numerical digits. Refer to the Functional Notes of this
command for available wildcards and proper data entry.
Specifies the ANI information that replaces the original DNIS information.
This information is entered using numerical digits. Enter the number without
punctuation.
Optional. Specifies the name associated with the ANI information. This
option is only available on trunks that support ANI name information
(integrated services digital network (ISDN) trunks, Session Initiation
Protocol (SIP) trunks, T1 loop start (LS) network trunks, and T1 ground start
(GS) network trunks).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice T1 Trunk Command Set
3622