Table of Contents
Advertisement
Command Reference Guide
Voice SIP Trunk Command Set
media-loopback
Use the media-loopback command to configure a Session Initiation Protocol (SIP) trunk to allow media
loopback calls to be placed on the trunk. Media loopback enables media sessions to be established where
the media is looped back to the transmitter. This is typically referred to as active monitoring of services.
This command allows media loopback sessions on some SIP trunks while disallowing media-loopback on
others. Use the no form of this command do disable this feature.
Syntax Description
No subcommands.
Default Values
By default, media-loopback is enabled on SIP trunks.
Command History
A4.03
Command was introduced.
Usage Examples
The following example enables media loopback on trunk T01:
(config)#voice trunk t01 type sip
(config-t01)#media-loopback
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3574
Advertisement
Table of Contents
