Command Reference Guide
VLAN Command Set
media ethernet
Use the media ethernet command to set the virtual local area network (VLAN) media type to Ethernet.
The only media type currently supported is Ethernet. Use the no form of this command to reset to the
default setting.
Syntax Description
No subcommands.
Default Values
By default, media is set to Ethernet.
Command History
Release 5.1
Command was introduced.
Usage Examples
The following example sets the media type to Ethernet for VLAN 2:
(config)#vlan 2
(config-vlan 2)#media ethernet
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2692