Table of Contents
Advertisement
Command Reference Guide
Voice SIP Trunk Command Set
prefer trunk-routing
Use the prefer trunk-routing command to add a trunk to a list of trunks that are considered first for call
routing, regardless of system routing mode or locally configured extensions. Use the no form of this
command to remove the trunk from the list.
Syntax Description
No subcommands.
Default Values
By default, prefer trunk-routing is disabled.
Command History
Release A2
Command was introduced.
Functional Notes
Trunk routing can be specified as a preference for specific trunks, allowing the trunk to be considered first
for routing rather than relying on the internal or external nature of the call to dictate whether the trunk or
voice station is the first choice routing path. The prefer trunk-routing command, executed from a specific
trunk's configuration mode, adds the trunk to a list of trunks that are considered first for routing.
By default, no trunk routing preference is set, so that each trunk operates as dictated by normal call routing
modes. Adding the trunk routing preference only affects how inbound calls from the specific trunk are
handled.
Usage Examples
The following example specifies that trunk routing is preferred on the trunk T01:
(config)#voice trunk t01 type sip
(config-t01)#prefer trunk-routing
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3584
Advertisement
Table of Contents
