ADTRAN AOS Version R10.1.0 Command Reference Manual page 3597

Command Reference Guide
sip-server secondary <value>
Use the sip-server secondary command to define the secondary name/address of the Session Initiation
Protocol (SIP) server to which the trunk will send call-related SIP messages. Use the no form of this
command to return to the default setting. Variations of this command include:
sip-server secondary <value>
sip-server secondary <value> udp
sip-server secondary <value> udp <number>
sip-server secondary <value> tcp
sip-server secondary <value> tcp <number>
Syntax Description
<value>
<number>
tcp
udp
Default Values
By default, the IP address is set to 0.0.0.0 and the UDP port is set to 5060.
Command History
Release 9.3
Release 15.1
Usage Examples
The following example sets the SIP proxy server to as1.adtran.com with a UDP port of 9070:
(config)#voice trunk t01 type sip
(config-t01)#sip-server secondary as1.adtran.com udp 9070
60000CRG0-35E
Specifies the fully qualified domain name (FQDN) or IP address of the SIP
proxy server. IP addresses should be expressed in dotted decimal notation
(for example, 10.10.10.1).
Optional. Specifies the port number. Range is 0 to 65535.
Optional. Sets the Transmission Control Protocol (TCP) port of the
outbound proxy server.
Optional. Sets the User Datagram Protocol (UDP) port of the outbound
proxy server.
Command was introduced.
Command was expanded.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
3597