ADTRAN AOS Version R10.1.0 Command Reference Manual page 3363

Command Reference Guide
server <hostname | ip address>
Use the server command to add a predefined terminal access controller access control system plus
(TACACS+) server to the TACACS+ server group for use with authentication, authorization, and
accounting (AAA). Use the no form of this command to remove the server from the group.
Syntax Description
<hostname | ip address>
Default Values
By default, no TACACS+ server groups are configured.
Command History
Release 5.1
Functional Notes
Empty TACACS+ server groups are saved. When the last server is removed from a group, AOS
automatically maintains the group.
For more information about server groups, refer to the command
Usage Examples
The following example specifies that the TACACS+ servers at IP address 192.168.1.4 and 192.168.1.5 are
added to the server group TACAuthgroup:
(config)#aaa group server tacacs+ TACAuthgroup
(config-sg-tacacs+)#server 192.168.1.4
(config-sg-tacacs+)#server 192.168.1.5
(config-sg-tacacs+)#exit
(config)#
60000CRG0-35E
Specifies the server to add to the group. IP addresses should be expressed
in dotted decimal notation (for example, 10.10.10.1). If a host name is used,
a domain naming system (DNS) server should be learned by the AOS
device using Dynamic Host Configuration Protocol (DHCP), Point-to-Point
Protocol (PPP), or specified in the Global Configuration mode with the
command name-server on page
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
TACACS+ Group Command Set
1270.
aaa group server on page 886.
3363