ADTRAN AOS Version R10.1.0 Command Reference Manual page 2805

Command Reference Guide
ethernet-speed
Use the ethernet-speed command to configure the speed of the wireless access point's (AP) Ethernet
interface. Use the no form of this command to return to the default value. Variations of this command
include:
ethernet-speed 10
ethernet-speed 100
ethernet-speed auto
This command is not available for the embedded access point module (EAPM). For the
EAPM, the Ethernet speed is fixed at 100 Mbps.
Syntax Description
10
100
auto
Default Values
By default, the ethernet-speed is set to auto.
Command History
Release 15.1
Usage Examples
The following example sets the AP's Ethernet speed to 10 Mbps:
(config)#interface dot11ap 1
(config-dot11ap 1)#ethernet-speed 10
60000CRG0-35E
Configures the AP's Ethernet speed for 10 Mbps.
Configures the AP's Ethernet speed for 100 Mbps.
Configures the AP's Ethernet speed for auto negotiation.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
AP Interface Command Set
2805