ADTRAN AOS Version R10.1.0 Command Reference Manual page 3327

Command Reference Guide
set ip next-hop <ip address>
Use the set ip next-hop command to set the next-hop IP address to the specified address for all routes
serviced by the route map. Use the no form of this command to remove the configured next-hop address.
Syntax Description
<ip address>
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Usage Examples
The following example sets the ip next-hop interface to 10.10.11.254 in the header of the route map named
MYMAP:
(config)#route-map MYMAP permit 100
(config-route-map)#set ip next-hop 10.10.11.254
60000CRG0-35E
Specifies a valid IP address. IP addresses should be expressed in dotted
decimal notation (for example, 10.10.10.1). More than one address can be
entered, and the router uses the first available route from the list.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
3327