Table of Contents
Advertisement
Command Reference Guide
Voice ISDN Trunk Command Set
early-cut-through
Use the early-cut-through command to provide the caller with inband ringback and other call progress
signals. This command should not be issued if the connected equipment does not provide inband ringback
and other call progress signals. This option is only valid for voice trunks in the network role. Use the no
form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, early-cut-through is enabled.
Command History
Release A5.02
Command was introduced.
Usage Examples
The following example disables early-cut-through:
(config)#voice trunk t01 type isdn
(config-t01)#no early-cut-through
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3499
Advertisement
Table of Contents
