ADTRAN AOS Version R10.1.0 Command Reference Manual page 2836

Command Reference Guide Radio Interface Command Set
world-mode dot11d
Use the world-mode dot11d command to enable 802.11d mode. This mode allows country codes to be
transmitted in beacons sent from the access point (AP). Use the no form of this command to disable
802.11d mode.
Syntax Description
No subcommands.
Default Values
By default, 802.11d mode is disabled.
Command History
Release 15.1 Command was introduced.
Usage Examples
The following example enables 802.11d mode on an 802.11bg wireless radio:
(config)#interface dot11ap 1/1 radio-type 802.11bg
(config-dot11ap 1/1-bg)#world-mode dot11d
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2836