ADTRAN AOS Version R10.1.0 Command Reference Manual page 2820

Command Reference Guide
inactivity-timeout max <value>
Use the inactivity-timeout max command to set the maximum length of inactivity allowed between an
access point (AP) and its clients. If no response is seen from the client within the timeout, the client will be
disassociated. Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the maximum inactivity timeout is 5 minutes.
Command History
Release 15.1
Usage Examples
The following example sets the maximum inactivity timeout to 2 minutes on an 802.11bg wireless radio:
(config)#interface dot11ap 1/1 radio-type 802.11bg
(config-dot11ap 1/1-bg)#inactivity-timeout max 2
60000CRG0-35E
Specifies the maximum length of time a connection between an AP and
access controller (AC) is allowed to remain inactive. Range is 1 to
99 minutes.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Radio Interface Command Set
2820