ADTRAN AOS Version R10.1.0 Command Reference Manual page 3359

Command Reference Guide
match-value <pattern>
new-value <pattern>
<sequence number>
Default Values
By default, no variables are configured.
Command History
Release R10.1.0
Functional Notes
Multiple headers of the same type can occur in SIP messages, and therefore, the specified position of the
header can determine whether a match occurs. For more information, refer to Appendix B: Matching
Regular Expressions in SIP Messages with Multiples of the Same Header in the configuration guide
Manipulating SIP Headers and Messages in AOS, available online at
(article number 3526).
SIP headers available for matching include the following:
Accept-Contact
Call-Id
Content-Length
Event
Identity-info
Record-Route
Reject-Contact
Route
Sip-Status-Line
To
SIP headers can also be expressed in compact form in a SIP message. Compact forms of the header
name will match the full SIP header name.
60000CRG0-35E
Optional. Specifies the pattern to be used for matching. This can be a
regular expression or a text string, and can reference variable names.
Specifies the value to be assigned to the variable. This can be a regular
expression or a text string.
Optional. Specifies the sequence number given to the message rule, which
determines the order in which the rules are processed. Valid sequence
number range is 1 to 99999. By default, sequence numbering occurs in
increments of 10, and all rules are processed in sequence.
Command was introduced.
Allow
Contact
Content-Type
From
P-Asserted-Identity
Refer-To
Replaces
Session-Expires
Subject
Via
Copyright © 2012 ADTRAN, Inc.
SIP HMR Command Set
http://supportforums.adtran.com
Allow-Events
Content-Encoding
Diversion
Identity
P-Preferred-Identity
Referred-By
Request-Disposition
Sip-Req-Uri
Supported
<name> (specifies
another header not listed
here)
3359