ADTRAN AOS Version R10.1.0 Command Reference Manual page 3667

Command Reference Guide
plc
Use the plc command to enable packet loss concealment (PLC). PLC is used to prevent choppy
connections by concealing a packet loss by replacing the lost packet with another voice packet in the data
stream. Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, PLC is enabled.
Command History
Release 11.1
Release 15.1
Usage Examples
The following example disables PLC for the voice line sales:
(config)#voice line sales
(config-sales)#no plc
60000CRG0-35E
Command was introduced.
Command was added to the Voice Line Interface.
Copyright © 2012 ADTRAN, Inc.
Voice Line Account Command Set
3667