Table of Contents
Advertisement
Command Reference Guide
Voice Analog Trunk Command Set
plc
Use the plc command to enable packet loss concealment (PLC). PLC is used to prevent choppy
connections by concealing a packet loss by replacing the lost packet with another voice packet in the data
stream. Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, PLC is enabled on this interface.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example disables PLC on trunk T01:
(config)#voice trunk t01 type analog supervision loop-start
(config-t01)#no plc
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3469
Advertisement
Table of Contents
