ADTRAN AOS Version R10.1.0 Command Reference Manual page 3209

Command Reference Guide Mail Agent Command Set
send test
Use the send test command to have the mail agent send a test email message to the email address(es)
specified by the address to command (refer to address on page 3202) or the logging email address-list
command (refer to logging email address-list <email address> ; <email address> on page 1238).
Syntax Description
No subcommands.
Default Values
By default, the test email is sent using your Simple Mail Transfer Protocol (SMTP) settings even if the mail
client is currently shut down.
Command History
Release 17.2 Command was introduced.
Functional Notes
The command appends "This is a test message" onto the current message buffer and sends an email to
the configured addresses. This command is used to test that the agent is sending emails to the proper
addresses.
Usage Examples
The following example instructs mail agent myagent to send a test email to the previously configured
email addresses:
(config)#mail-client myagent
(config-mail-client-myagent)#send test
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3209