ADTRAN AOS Version R10.1.0 Command Reference Manual page 3331

Command Reference Guide
set metric <value>
Use the set metric command to specify a metric value for the route map. Use the no form of this command
to cancel the metric value.
Syntax Description
<value>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Usage Examples
The following example sets the metric value for MYMAP to 100:
(config)#route-map MYMAP permit 100
(config-route-map)#set metric 100
60000CRG0-35E
Sets the metric value. Valid range is 0 to 4294967295.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
3331