Command Reference Guide
timezone
Use the timezone command to specify the time zone information that is supplied to requesting Dynamic
Host Control Protocol version 6 (DHCPv6) clients served by this DHCPv6 pool. Use the no form of this
command to remove the time zone information. Variations of this command include:
timezone <timezone>
timezone <tzdb string>
timezone posix <string>
Syntax Description
<timezone>
<tzdb string>
posix <string>
Default Values
By default, no time zone information is specified.
Command History
Release 18.3
Usage Examples
The following example specifies a time zone for requesting DHCPv6 clients using TZ database format:
(config)#ipv6 dhcp pool MyPool
(config-dhcpv6)#timezone America\Chicago
60000CRG0-35E
Specifies the time zone using a predefined value. Enter timezone ? to
display the available time zones and their associated cities.
Specifies a time zone string in standard time zone (TZ) database format (as
defined in RFC 4833). TZ database strings are limited to 256 characters.
Specifies a time zone in POSIX form, using the following format:
EST5EDT4,M3.2.0/02:00,M11.1.0/02:00.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv6 Pool Command Set
3084