ADTRAN AOS Version R10.1.0 Command Reference Manual page 3413

Command Reference Guide
did <number>
Use the did command to configure direct inward dialing (DID) for this group. DID is used if a service
provider is providing digits to the unit on inbound calls or if the unit needs to provide DID information to a
piece of customer premises equipment (CPE). Use the no form of this command to disable this feature.
Syntax Description
<number>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Usage Examples
The following example assigns DID 44 to the ring group 1234:
(config)#voice ring-group 1234
(config-1234)#did 44
60000CRG0-35E
Defines the DID number assigned to the ring group.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Ring Group Command Set
3413