Table of Contents
Advertisement
Command Reference Guide
match ani <template> add p-asserted-identity <template>
Use the match ani add p-asserted-identity command to add a P-Asserted-Identity header to an outgoing
Session Initiation Protocol (SIP) message. Use the no form of this command to remove the
P-Asserted-Identity header.
Syntax Description
ani <template>
add
p-asserted-identity <template>
Default Values
By default, P-Asserted-Identity headers are not added to SIP messages.
Command History
Release A4.01
Functional Notes
Both match source and match target templates are defined in the same way as dial plan entries.
Wildcards available for use are as follows:
0-9 = Match exact digit only.
M = Any digit 1 to 8.
X = Any single digit (0 to 9).
N = Any digit 2 to 9.
[123] = Any digit contained in the bracketed list.
Do not use exclamation points, commas, spaces, etc., inside the brackets. Commas are
implied between numbers in the brackets.
60000CRG0-35E
Specifies the source ANI information to be matched. This information
is entered using wildcards and numerical digits. Refer to the
Functional Notes of this command for available wildcards and proper
data entry.
Specifies that when the match source matches the match source
template, SIP headers are added to the SIP trunk messages.
Specifies that it is a P-Asserted-Identity header that is added to the
SIP message and specifies the match target template. Templates are
entered using wildcards and numerical digits. Refer to the Functional
Notes of this command for available wildcards and proper data entry.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
3562
Advertisement
Table of Contents
