Table of Contents
Advertisement
Command Reference Guide
rtp qos dscp <value>
Use the rtp qos dscp command to configure the maximum Realtime Transport Protocol (RTP) quality of
service (QoS) parameters for differentiated services code point (DSCP). Use the no form of this command
to return to the default value.
Syntax Description
<value>
Default Values
By default, the RTP QoS parameter for DSCP on Media Gateway Control Protocol (MGCP) endpoints is
46.
Command History
Release 9.3
Release 15.1
Release A2
Usage Examples
The following example configures the RTP QoS DSCP for MGCP endpoint 1 to 60:
(config)#voice mgcp-endpoint 1
(config-mgcp-1)#rtp qos dscp 60
60000CRG0-35E
Configures the RTP QoS parameter for DSCP. Enter a value between
10 and 63.
Command was introduced.
Command was added to the Voice Line Interface.
Command was added to the MGCP endpoint configuration.
Copyright © 2012 ADTRAN, Inc.
MGCP Command Set
3246
Advertisement
Table of Contents
