ADTRAN AOS Version R10.1.0 Command Reference Manual page 3579

Command Reference Guide
phone-context <string> plan unknown type unknown
Syntax Description
<string>
plan
<number>
e164
private
unkown
type
<number>
abbreviated
international
level0
level1
level2
national
60000CRG0-35E
Specifies a string of text for the phone-context map entry. This is used to
convert between phone-context and NPI/TON values.
Specifies the NPI to associate with the phone-context map entry.
Specifies the NPI value. Valid range is 0 to 15.
Specifies using the ISDN/telephone numbering plan (E.164) value (0001)
for the NPI bits of the Type-of-Address octet.
Specifies using the private numbering plan value (1001) for the NPI bits of
the Type-of-Address octet.
Specifies using the unknown numbering plan value (0000) for the NPI bits
of the Type-of-Address octet.
Specifies the TON to associate with the phone-context map entry.
Specifies the TON value. Valid range is 0 to 7.
Specifies using the abbreviated value (110) for the TON bits of the
Type-of-Address octet. Abbreviated is used mainly in private ISDN network
applications and the implementation is network dependent.
Specifies using the international value (001) for the TON bits of the
Type-of-Address octet. International is used for calls destined outside the
national calling area. International calls have the international direct dialing
(IDD) prefix removed. For example, consider an international call of 011-N$,
where the IDD prefix is 011 and the N$ represents the digits necessary for
routing the call at the destination. When the called party information
element (IE) is created for this call, the prefix is stripped and the N$ digits
are placed in the number digits field.
Specifies using the level 0 local number type in a Private Numbering Plan
(PNP). The value of the TON bits of the Type-of-Address octet is identical to
the subscriber value (100) in E.164 format.
Specifies using the level 1 regional number type in a PNP. The value of the
TON bits of the Type-of-Address octet is identical to the national value
(010) in E.164 format.
Specifies using the level 2 local number type in a PNP. The value of the
TON bits of the Type-of-Address octet is identical to the international value
(001) in E.164 format.
Specifies using the national value (010) for the TON bits of the
Type-of-Address octet. National is used for calls destined for inside the
national calling area (calls that do not cross into an international local
access and transport area (LATA)). National calls have the direct dialing
prefix removed. For example, consider a national call with a direct dialing
prefix of 1 and NXX-NXX-XXXX to represent the ten-digit number
necessary for routing the call. When the called party IE is created for this
call, the prefix (1) is stripped and the NXX-NXX-XXXX digits are placed in
the number digits field.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
3579