ADTRAN AOS Version R10.1.0 Command Reference Manual page 2843

Command Reference Guide
security mode
Use the security mode command to configure the security mode settings for this virtual access point
(VAP). Use the no form of this command to return to the default setting. Depending on the mode chosen
between wired equivalency privacy (WEP) and wi-fi protected access (WPA), further command options
are available.
WEP security mode is not as secure as WPA and is not recommended.
Variations of this command include:
security mode none
security mode wep open-key
security mode wep open-key eap
security mode wep open-key eap md5-static-key
security mode wep open-key eap md5-static-key-optional
security mode wep shared-key
security mode wpa aes-ccmp eap
security mode wpa aes-ccmp psk <key>
security mode wpa aes-ccmp tkip eap
security mode wpa aes-ccmp tkip psk <key>
security mode wpa tkip aes-ccmp eap
security mode wpa tkip aes-ccmp psk <key>
security mode wpa tkip eap
security mode wpa tkip psk <key>
In order to connect to the access point (AP), a client must support the same security mode
as configured on this VAP.
Syntax Description
none
wep
open-key
shared-key
60000CRG0-35E
Specifies that no security be used on this VAP. There is no authentication
required to connect to this VAP and no encryption is provided on the
wireless connection.
Configures the VAP for WEP security mode.
Specifies that the WEP security mode use open authentication with static
WEP keys. The client and the VAP must be configured with the same static
key. A static WEP key is configured on the VAP by using the command
security wep-key on page
Specifies that the WEP security mode use shared authentication with
encrypted static keys. The client and the VAP must be configured with the
same static key. A static WEP key is configured on the VAP by using the
command security wep-key on page
Copyright © 2012 ADTRAN, Inc.
VAP Interface Command Set
2846.
2846.
2843