Table of Contents
Advertisement
Command Reference Guide
redistribute static
Use the redistribute static command to pass routes from one network to another, regardless of the routing
protocol implemented on the routing domain. Using the static keyword allows the propagation of static
routes to other interfaces using the Routing Information Protocol (RIP). Use the no form of this command
to disable the propagation of the specified route type. Variations of this command include:
redistribute static
redistribute static metric <value>
redistribute static route-map <name>
The gateway network for the static route must participate in RIP by using the network
command for the gateway network.
Syntax Description
metric <value>
route-map <name>
Default Values
By default, this command is disabled.
Command History
Release 1.1
Release 14.1
Functional Notes
Redistributing static routes allows other network devices to learn about routes without requiring manual
input to each device on the network.
Usage Examples
The following example passes the static routes found in the route table to other networks running the RIP
routing protocol:
(config)#router rip
(config-rip)#redistribute static
60000CRG0-35E
Optional. Specifies the hop count to use for advertising redistributed static
routes in RIP.
Optional. Specifies the route map filter to use for advertising redistributed
static routes in RIP.
Command was introduced.
Command was expanded to include the route map filtering.
Copyright © 2012 ADTRAN, Inc.
Router (RIP) Command Set
3032
Advertisement
Table of Contents
